Epson Stylus Color 400/440

  Language: Epson ESC/P Raster

Speed: Black Text approx. 4 PPM, Color 2.5 PPM, Photos 8x10 up to 6 minutes

Internal Buffer: 10KB

Graphics: up to 720x720dpi

Color InkJet Technology

 FontsPaperSettingsInterfaces

Epson Stylus Color 400/440 Fonts

 No Internal Fonts

Epson Stylus Color 400/440 Paper Handling

Unprintable Region

Top:  .12"

Bottom:  .12"

Left:  .12"

Right: .12"

Continuous Feeding

Standard Feeder: Input Tray 100 sheets or 10 envelopes.  Output Tray 30 sheets.

Envelope Feeding

Epson Stylus Color 400/440 Settings

Front Panel

Power Light The Printer is on.  To reset printer, press twice while power is on.
Power Light Flash Receiving Data, Replace ink cartridge, cleaning heads, certain error conditions.
Paper Light Flash Paper is out, or there is a paper jam.  
Load/Eject button Loads or ejects a sheet of paper if you press and release it within two seconds.  Hold the Load/Eject button while turning the printer on will run a printer check.
Ink Light Flash Ink is low, empty or not installed.
Ink Button Clean print heads, replacing ink cartridges.  Hold the Ink button while turning the printer on will change the character table from the default US and standard European characters, PC437, to the Multilingual character table PC850.

Epson Stylus Color 400/440 Interfaces

Parallel

Availability: Standard

Connection: Centronics Female

Activation: Default

USB

Availability:  Kit sold separately for the 440.